ATV Ramps & Four Wheeler Loading Ramps
Fill in the form to see the minimum ramp length you need.
Need help measuring?
Get your quad out of the garage and on to new trails and terrain.
Whether you’re hauling your ATV by truck or trailer you need a ramp that has your back. That’s where we come in.
Our ATV ramps are lightweight, high traction and guaranteed to last. We love to ride and our years on tracks and trails around the country have inspired us to create some of the most innovative, versatile and durable four wheeler ramps on the market.And when you buy directly from us you avoid the middleman and get the best bang for your buck. Don’t settle for the backyard, load up and discover new trails with an ATV ramp from Black Widow Powersports.
Choosing the right length for your ATV ramp
Ramp length is safety factor #1 when it comes to loading. For most pickup trucks, an ATV ramp between 7' and 9' hits the sweet spot, giving you enough of a lower incline and better traction as you ride up and onto the bed.
If you’re loading onto a trailer, you can usually get by with a 6' ATV ramp since the deck sits closer to the ground. Longer ramps spread out the load and make climbing less steep, which means less risk of spinning tires or catching a skid plate. Going too short forces your ATV up at a sharper angle, making it easy to lose control. Run the numbers for your bed height, keep it safe, and you’ll be set for loading in any environment.
Rung or punch plate: Which is better?
Ramps with rungs have less overall weight than punch plate ramps, and the wider open spaces mean that dirt, mud, snow and debris pass right through. Most rung designed are grooved or serrated to catch tires better for consistent traction.
Punch plate ramps are designed for ultimate tire grip, and work really well in very wet or muddy conditions. The serrated circular openings allow debris to pass through, without risking spinning wheels.
How to safely load an ATV into a pickup truck
- Secure your ATV ramp to the truck. We include safety straps with all of our ramps so that there's no excuse not to tie it down properly. Connect to a metal point on the truck, never plastic.
- Line up your ATV with the ramp and the truck bed. If you're crooked, you could slip off the side of the ramp and bust a limb or your ride.
- Ride up slowly and with control! Do not crank it. I repeat, do not crank it.
- Once in the truck bed, secure your ATV with appropriate tie downs. Don't use bungees or cam straps, use 2" ratchet straps or wheel nets if you have them.
For additional detail, read How to Load an ATV in a Truck Bed or Trailer.
FAQs About ATV Ramps
How much weight can an ATV ramp support?
Ramp capacity varies by model. Always verify that the ramp's rated capacity exceeds the combined weight of the ATV and rider if riding up the ramp.
Is it better to ride or walk an ATV up the ramp?
Many manufacturers recommend walking beside the ATV using low gear and controlled throttle, especially when loading into pickup trucks. Always follow the ramp manufacturer's instructions.
How can I keep an ATV ramp from slipping during loading?
Most ATV ramps include safety straps, hooks, or attachment points that secure the ramp to the vehicle or trailer. These should always be used before loading.
What ramp angle is safest for loading an ATV?
A lower loading angle is generally safer and easier to navigate. Using a longer ramp can help reduce the angle and minimize the risk of high-centering or wheel spin.
Can I use the same ramp for other equipment besides an ATV?
Many ATV ramps can also accommodate lawn tractors, UTVs, snow blowers, or motorcycles if the equipment weight and tire width fall within the ramp's specifications.
What is the difference between arched and straight ATV ramps?
Arched ramps provide additional clearance in the middle of the ramp, helping prevent the ATV from bottoming out when transitioning from the ground to the trailer or truck bed.
How wide should an ATV loading ramp be?
The ramp should provide adequate support for the ATV's tire spacing. Some users prefer dual-runner ramps, while others choose full-width ramps for added stability and versatility.
Can ATV ramps be used in wet or muddy conditions?
Many ramps feature traction surfaces designed to improve grip, but extra caution is required when conditions are wet, muddy, icy, or otherwise slippery.
How do I inspect an ATV ramp for safety before use?
Check for bent sections, cracked welds, loose hardware, damaged hinges, worn traction surfaces, and any signs of corrosion or structural damage before every use.
Can one person load an ATV by themselves?
We never recommend loading an ATV by yourself. Always use a spotter, as they will be able to identify problems that you might not be able to see from your vantage point.
Do ATV ramps work with lifted trucks?
A long enough ramp is compatible with any truck. If your truck bed is 50" to 65" high, your ATV has a wheelbase of 50" and a ground clearance of 10", then you'll a ramp that's well over 10' to safely load your ATV into that truck. (source: ATV ramp calculator).
What causes an ATV to bottom out on a ramp?
If your ATV has a long wheelbase, it can high-center at the top of the ramp. To avoid this, use a longer ramp or purchase a ramp with an arch that designed to prevent high-centering.
How do I store ATV ramps when not in use?
Care for your ramps like any piece of equipment. Keep them out of the elements and away from moisture (especially if they're made of a metal like steel which is susceptible to corrosion). When not in use, the best place for them is in your garage.
What are ATV ramp safety straps used for?
ATV Ramp safety straps are designed to loop through your ramp and attach to a metal component of your truck or trailer. The point of them is to keep the ramp completely secured so that it doesn't kick out, fall down, or shift dramatically when you start to load your ATV up onto the ramp.
How do I calculate the loading angle of a ramp?
Many websites offer ATV ramp calculators that require you to enter the wheelbase and ground clearance of your ATV, as well as the height of your truck bed or trailer, and they do the math for you.