Black Ice 7' 10" Folding Snowmobile Ramp (w/Extension and Stud Protectors)
Key Features:
- Outer panels feature polyethylene guides for low-resistance loading with any type of carbide; extension assists with loading sleds
- 1,500 lb. weight capacity; ramp measures 7' 10" L x 54" W, extension measures 5' 1.5" L x 17.5" W
- Lightweight aluminum design with stud protectors folds down to 17.5" W for easy transport and storage
Folds for easy transport and storage in your truck bed or garage
From 54 inches wide to a folded width of 17.5 inches, this ramp stores compactly in pickup beds or trailers when it’s not in use.
Optional user-installed stud protectors
If you need to keep your studs from tearing up your aluminum ramp, the ramp with the Caliber Ramp GRIPS stud protectors is the choice for you. They come ready to install on each rung, and keep your ramp looking good for longer, with better grip for studded tracks.
Hook-under extension grips track for easier loading
The rust-resistant, compact, and lightweight extension easily hooks under the 1st rung of the center section of the ramp system. Great for situations where it might be hard for the track to grip as the sled starts to climb the ramp, it makes loading that much easier.
Loading your sled is a one-man job made simple with this folding snowmobile ramp. Made specially for snowmobiles, it features three sections—a center panel with exposed rungs for traction and two outer ski guides for low-resistance loading. Rev up and on in one smooth motion!
Affix this ramp directly to your truck bed using six rubber-coated attaching points and two included cam buckle straps. The extension (5' 1.5" L x 17.5" W) slides under the bottom rung, to provide added grip. Included Caliber Ramp GRIPS add traction and prevent damage to rungs.
High-strength, lightweight aluminum is corrosion resistant, so your ramp never succumbs to winter weather. When you’re done using it, ramp folds down to 17.5" wide for compartmentalized storage. Supports 1,500 lb. and accommodates most sled types.
- Outer panels feature polyethylene guides for low-resistance loading with any type of carbide; extension assists with loading sleds
- 1,500 lb. weight capacity; ramp measures 7' 10" L x 54" W, extension measures 5' 1.5" L x 17.5" W
- Lightweight aluminum design with stud protectors folds down to 17.5" W for easy transport and storage